JN-W/S series waterproof model solar controller

Main features
1. new wireless remote control design, through the handheld devices can modify the control parameters.
2.with high performance LED constant current drive power supply, the maximum efficiency of the constant current source is up to 95%.
3.data communication adopts many times of handshake protocol and data compression algorithm, which makes the data transmission accurate and fast.
4.the controller has the function of automatically adjusting the light, and it will automatically adjust the output power of the load end with the decrease of the battery voltage. The load is extended working time effectively, ensure that when a long continuous overcast and rainy days, the battery will not cause the light under pressure.
5.Four 4 hours of light design, working hours 0-15 hours can be set, the power of 0%-100% can be set up;
6.to improve the three section of the charging algorithm, once a week to charge a balanced battery, effectively prevent the battery and the phenomenon of uneven, improve the battery life.
7.controller battery plate and battery positive electrode. The current that flows out of the positive electrode of the battery plate is directly into the positive electrode of the battery, and the controller's life is greatly improved without passing through the internal circuit of the controller.
8.IP68 waterproof grade, aluminum shell design, can effectively prevent all kinds of corrosion.
9.battery over charge, over discharge, reverse connection protection; LED short circuit protection, open circuit protection, etc.; TVS first class lightning protection.
Product description

Use suggestion

  1 the controller will identify the battery voltage when power up, please wait for the battery to wait for the initialization, and ensure the connection is reliable.
  2 the controller will heat during operation, it is recommended to be installed in the environment of ventilation and heat radiation.
  3 controller will test the environment temperature of the battery charge to compensate, as far as possible the battery and controller in the same environment.
  4 battery is often full of very important, at least once a month is full, otherwise the battery will suffer permanent damage. The battery can be filled only when the energy of the battery is more than the energy of the load. Please keep this in mind when you configure the system.

Product technical parameters
System voltage 12V/24V Auto
System current 5A/10A/15A
No-load loss < 5mA
Solar input voltage < 55V
Over-voltage protection 16.5V;×2/24V 
Balance charge voltage 14.6V;× 2/24 V (25 ℃), maintain time: 1 hour
Ascension recharging voltage 14.4V;2/24 V (25 ℃), maintain time: two hours
Float charging pressure 13.8V;×2/24V (25℃)
Charging to return to voltage 13.2V;×2/24V (25℃)
Discharge to return to voltage 12.5V;×2/24V
Discharge protection 10.8V;×2/24V
Temperature compensation -4.0mv/℃/2V;
Electric voltage Electric drive 7 V, electric close 2 V
Working temperature -35  to + 65 ℃;
Protection grade IP68
weight 0.15Kg
size 102 x 81 x 20 (mm) (long x width × high)

Data download

Online consulting
Phone number:
QQ number:
Verification Code:
Go Back
Online Service
OnlineOnline consulting
Contact US:
0551 - 65372576